Using Call Guard - Sanyo KATANA User Manual

Using Call Guard

Your phone has two ways of alerting you when you are roaming off the
network available to you: the onscreen roaming icon and Call Guard. Call
Guard makes it easy to manage your roaming charges by requiring an extra
step before you can place or answer a roaming call. (This additional step is
not required when you make or receive calls while on the network.)
To turn Call Guard on or off:
1.
Select
2.
Select On or Off.
To place roaming calls with Call Guard on:
1.
From standby mode, dial 1 + area code + the seven-digit number.
(You can also initiate a call from the Contacts, Call History, or
Messaging.)
2.
Press
Call:Speaker On).
3.
Press
– or –
Press any key to erase the pop-up message, and then press Options
(right softkey) > Roam Call or Roam:Speaker On.
To answer incoming roaming calls with Call Guard on:
1.
Press
roaming charges will apply.)
2.
Press
– or –
Press any key to erase the pop-up message, and then press Options
(right softkey) > Answer or Answer:Speaker.
84 Section 2D: Controlling Your Roaming Experience
> Settings > Others > Roaming > Call Guard.
or (or press Options [right softkey] > Call or
to proceed while the pop-up message is displayed.
or . (A message will be displayed notifying you that
to proceed while the pop-up message is displayed.