Agc - Sanyo VCC-5972P Instruction Manual

ADJUSTMENTS

5. AGC

1
Set the AGC switch (6) to ON.
The on-screen setting for AGC will automatically switch to
ON. Press the CURSOR (j or l) button to select the
on-screen ON setting (get it flashing), then press the SET
button. The adjustment sub-menu will be displayed.
CURSOR
ON
OFF
2
Setting the GAMMA
Press the CURSOR (d or c) button to select ON or OFF,
according to the conditions described below.
ON (0.45): For natural looking images. The image signal is
compressed and this setting is recommended
under normal conditions.
OFF (1): The image signal is not compressed. This setting is
recommended when processing the images.
When finished setting the gamma, press the CURSOR (l)
button to select the AGC GAIN setting (get it flashing).
3
Setting the AGC GAIN
Press the CURSOR (d or c) button to select NORMAL or
HIGH, according to the conditions described below.
NORMAL: The AGC GAIN is set to 30 dB. When giving
the priority to the image quality over the
illumination of the darkest part of the subject.
HIGH: The AGC GAIN is set to 36 dB. When giving the
priority to the illumination of the darkest part of the
subject over the image quality.
Note:
When an adjustment is made, the PRESET setting will
automatically switch to OFF. To return to the initial value, just
return the PRESET setting to ON, then press the SET button.
4
When finished.
(Refer to step 4 on page 14.)
English
MENU FOR ADJUSTMENT
SET
SYNC
IRIS
BLC
WHITE BALANCE
AGC
21
INT
GAMMA
AI
ON
AGC GAIN
ATW
ON
GAMMA
AGC GAIN
ON
NORMAL
ON
NORMAL