Table of Contents
Advertisement
Automatic Gain Control (AGC) setting
The automatic gain control can be turned ON or OFF using the
AGC ON/OFF switch (6) in the camera setup section.
ON: Auto gain control function on (setting used under
normal conditions) (see page 21).
GAMMA: ON (0.45), OFF (1)
AGC GAIN: NORMAL (30 dB), HIGH (36 dB)
OFF: Fixed gain
Note:
When the AGC switch is set to OFF, the GAMMA and backlight
compensation are automatically set to OFF, and the IRIS is set to
AI.
White balance (WB) setting
Under normal conditions, the white balance is set to ATW (Auto
Tracing White-Balance). However, depending on the camera
installation location and conditions of use, the white balance
mode can be set using the two WB switches (7 and 8) in the
camera setup section (see table B).
•
ATW: Initial setting. The initial value cannot be changed.
•
LOCK: The white balance is done automatically while the
AWB LOCK button is pressed, then it is locked when
the button is released.
•
PRESET: The white balance is done according to one of the
three preset modes. The preset modes can be
adjusted manually in the adjustment sub-menu (see
page 19).
MODE 1: Setting for incandescent lighting (2660 ˚K).
MODE 2: Setting for indoors, fluorescent lighting (5100 ˚K).
MODE 3: Can be set for outdoors, sunlight (5100 ˚K).
•
MANUAL: Set to the initial value. The value can be changed
manually in the adjustment sub-menu (see page 20).
ON
OFF
Table B
ATW
7
8
AWB LOCK
LOCK
7
8
PRESET
7
8
MANUAL
7
8
10
English
Advertisement
Chapters
Table of Contents
