Colour System; Movie Theatre - JVC AV-28H35SUE Instructions Manual

MAX:
The level of DigiPure effect is set to the
maximum. If you set the DigiPure Pro
function to AUTO but feel that the original
picture quality has not been reproduced fully,
change the setting from AUTO to MAX.
• The MAX setting is not suitable for low-
quality pictures which contain a lot of
noise.
OFF:
The DigiPure Pro function is turned off.

COLOUR SYSTEM

The colour system is chosen automatically.
However, if the picture is not clear or no
colour appears, choose the colour system
manually.
COLOUR SYSTEM
PAL
BACK
TV OK
D1016EN
1 Choose COLOUR SYSTEM then
press the a a button
a a
2 Press the 5 5 buttons to chose the
5 5
appropriate colour system.
Then press the a
PAL:
PAL system
SECAM:
SECAM system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43:
NTSC 4.43 MHz system
AUTO:
This function detects a colour system from
the input signal. Only when you are viewing
a picture from Programme number PR 0
(AV), or EXT terminal, you can choose using
the AUTO function.
a button
a a
• The AUTO function may not function
properly if you have poor signal quality.
If the picture is abnormal in the AUTO
function, choose another colour system
manually.
• When in the Programme numbers PR 0
(AV) to PR 99, you cannot choose NTSC
3.58 or NTSC 4.43.

MOVIE THEATRE

The MOVIE THEATRE function displays a
cinema film picture more smoothly and
naturally on the screen.
AUTO:
The television automatically recognizes the
type of signal and turns the function on and
off.
ON:
This function is turned on.
OFF:
This function is turned off.
• The motion may appear unnatural when
viewing images with the NTSC colour
system. When the MOVIE THEATRE
function is set to AUTO or ON, the
motion may appear unnatural when
viewing images with the NTSC colour
system.
PICTURE FEATURES
21