Downloading The Data To Vcr; Changing The Country Setting - JVC AV-28H35SUE Instructions Manual

Downloading the data to VCR

You can transmit to the latest Programme
numbers (PR) data to the VCR with the T-V
LINK function.
Caution
• Only when the T-V LINK compatible VCR
is connected to the EXT-2 terminal, this
operation is enabled.
• Only when the T-V LINK menu is being
displayed, this operation is enabled.
T-V LINK
DOWNLOAD TV VCR
BACK
TV OK
EXIT
D0005-EN
1 Turn on the VCR
2 Press the a a button a a
The data transmission begins.
DOWNLOAD TV VCR
TRANSFER. . . . .
D0037-EN
The T-V LINK menu disappears once the
data transmission ends.
When the T-V LINK menu is
changed over to another menu:
The menu operation at the TV side is
completed and it is shifted to the menu
operation at the VCR side. Refer to the
VCR Instruction Manual and operate the
VCR.
Additional menu operations
If "FEATURE NOT AVAILABLE"
appears at the T-V LINK menu, ensure
the following three items are correct; then
press the a button to retry data
transmission.
• Has the T-V LINK compatible VCR
been connected to the EXT-2
terminal?
• Has the VCR power been turned on?
• Does the SCART cable that is
connected to the EXT-2 terminal to T-
V LINK compatible VCR have all
proper connections?
Changing the COUNTRY
setting
After the AUTO PROGRAM function is
completed, you can change the country you
have already set by using the AUTO
PROGRAM function.
When registering the TV channels for French
broadcast stations (SECAM-L system),
perform this operation to change the country.
1 Display the INSTALL menu
When the EDIT menu is currently
being displayed:
Press the h (Information) to return to the
INSTALL menu.
2 Press the 6 6 buttons to choose
6 6
AUTO PROGRAM. Then press the
a a button
a a
A COUNTRY menu appears as a sub-
menu of the AUTO PROGRAM function.
There are two COUNTRY menus.
Pressing the yellow button changes the
COUNTRY as follows:
BACK
TV OK
D0003-EN
BACK
START
TV OK
MORE
START
MORE
35