Sound Setting; Sound Adjustment; Hyper Sound - JVC AV-28H35SUE Instructions Manual

SOUND SETTING

See "Using the TV's menu" (page 19) for
details of displaying the menu.
SOUND SETTING
STEREO/
BASS
TREBLE
BALANCE

HYPER SOUND

BACK
TV OK
D0019-EN
STEREO / I • II
When you are viewing a bilingual broadcast
programme, you can choose the sound from
Bilingual I (Sub I) or Bilingual II (Sub II). If
you have poor reception on a stereo
broadcast, you can change from stereo to
mono sound so that you can hear the
broadcast more clearly and easily.
s: Stereo sound
v : mono sound
t : Bilingual I (sub I)
u : Bilingual II (sub II)
• The sound mode you can choose differs
depending on the TV programme.
• This function does not work in the EXT
modes. And this function does not appear
in the SOUND SETTING menu.

Sound adjustment

You can adjust the sound to your liking.
BASS
You can adjust the low tone of the sound.
2 : weaker
3 : stronger
TREBLE
You can adjust the high tone of the sound.
2 : weaker
3 : stronger
BALANCE
You can adjust the volume balance between
the left and right speaker.
2 : turn the left speaker's volume level up.
3 : turn the right speaker's volume level up.
24
OFF ON
HYPER SOUND
Mono sound is converted to simulated stereo
for a more enjoyable audio experience.
ON:
This function is turned on.
OFF:
This function is turned off.
• If the audio is stereo sound, the "3D
CINEMA SOUND function" (see
page 15) is the better choice as it makes
your listening experience more akin to
sitting in an actual cinema.
• When HYPER SOUND is turned on, 3D
CINEMA SOUND turns off, and when
3D CINEMA SOUND is turned on,
HYPER SOUND turns off.