Adjust The Volume; Watch Images From External Equipment - JVC AV-28H35SUE Instructions Manual

Use the PR LIST:
1 Press the h (Information) button to
display the PR LIST
Pressing the h (information) button
changes the display as follows:
PR LIST
PR ID
AV
01 BBC1
02
03
04
05
06
07
08
09
TV OK
-10 +10
D0011-EK
2 Press the 5 and 6 buttons to
choose a programme number (PR).
Then press the a button
• For programme numbers (PR) with the
CHILD LOCK function set, the n
(CHILD LOCK) mark appears next to
the programme number (PR) in the PR
LIST.
• You cannot use the 6 buttons to
choose a programme number (PR)
with the CHILD LOCK set.
• Even if you try to choose a programme
number (PR) with the CHILD LOCK
set, the n (CHILD LOCK) mark will
appear, and you cannot watch the TV
channel. To watch the TV channel, see
"CHILD LOCK" on page 28.
• If the picture is tilted, this can be
corrected. See "PICTURE TILT (Only
for AV-32X37HKE/AV-32X37HIE)"
on page 23.

Adjust the volume

Press the 5 buttons to adjust the
volume.
The volume indicator appears and the
volume changes as you press the q
buttons.
12 : 00
No display
Remote control buttons and functions
Muting the sound
Press the l (muting) button to
turn off the sound.
Pressing the l (muting) button again
restores the previous volume level.
Watch images from external
equipment
Use the o button:
Press the o button to choose
an EXT terminal.
TV mode
Programme
numbers
PR 1 – PR 99
Use the 6 buttons:
Press the 6 buttons to choose
an EXT terminal.
Use the PR LIST:
1 Press the h (Information) button to
display the PR LIST
2 Press the 5 and 6 buttons to
choose an EXT terminal. Then
press the a button
• The EXT terminals are registered after
the programme number PR 99.
• You can choose a video input signal
from the S-VIDEO signal (Y/C signal)
and regular video signal (composite
signal). For details, see "S-IN (S-
VIDEO input)" on page 26.
• If you do not have a clear picture or no
colour appears, change the colour
system manually. See "COLOUR
SYSTEM" on page 22.
• If you choose an EXT terminal with no
input signal, the EXT terminal number
becomes fixed on the screen.
• This TV set has a function which can
automatically change over the input
according to a special signal output
from an external device. (The EXT-4
terminal does not support this function.)
EXT modes
EXT-1 EXT-2
EXT-4 EXT-3
13