Connecting The Power Cord To The Ac Outlet; Putting The Batteries Into The Remote Control; Initial Settings - JVC AV-28H35SUE Instructions Manual

Setting up your TV
Connecting the power cord to
the AC outlet
Caution
• Operate only from the power source
specified (AC 220 – 240 V, 50 Hz) on the
unit.
Putting the batteries into the
Remote control
Use two AAA/R03 dry cell batteries.
Insert the batteries from the - end, making
sure the + and - polarities are correct.
• Follow the warnings printed on the
batteries.
• Battery life is about six months to one
year, depending on your frequency of use.
• The batteries we supply are only for
setting up and testing your TV, please
replace them as soon as necessary.
• If the remote control does not work
properly, replace the batteries.
4

Initial settings

When the TV is first turned on, it enters the
initial setting mode, and the JVC logo is
displayed. Follow the instructions on the on-
screen display to make the initial settings.
TV
1 Press the Main power button on the
TV
The Power lamp lights red (for power on),
then green (for TV on) and the JVC logo
is displayed.
Power lamp
• If the power lamp stays red and does
not change to green:
Your TV is in the standby mode. Press
the # (Standby) button on the remote
control to turn your TV on.
• The JVC logo does not appear when
your TV has been turned on once. In
this case, use the "LANGUAGE" and
"AUTO PROGRAM" functions to
make the initial settings. For details,
see "INSTALL" on page 28.
0
Blue button
AV
MENU
P
OK
P
Main power
button