Honda VFR800FE 2014 Owner's Manual page 78

7. Loosen the oil filter with a filter wrench
from the left side.
8. Remove the oil filter from the right side
and let the remaining oil drain out.
u Discard the oil and oil filter at an
approved recycling centre.
Rubber seal
Oil filter
Engine Oil u Changing Engine Oil & Filter
9. Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
10. Install a new oil filter and tighten.
Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft).
11. Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft).
12. Fill the crankcase with the recommended
oil ( P. 56) and install the oil fill cap.
2
Required oil
When changing oil & engine oil
filter:
3.1 litres (3.3 US qt, 2.7 Imp qt)
When changing oil only:
2.9 litres (3.1 US qt, 2.6 Imp qt)
13. Check the oil level.
14. Check that there are no oil leaks.
15. Install the right and left under cowls.
P. 72
2
75