Instruments
If the ignition switch is turned off, the button
is not pressed for about 30 seconds, or the
handle grip heater level is changed, the
control is automatically switched from the
setting mode to the ordinary display. Only
items that have been set are applied.
1 Clock setting:
!a
Turn the ignition switch ON.
!b
Press and hold
the hour digits start flashing.
!c
Press
A
button until the desired hour is
displayed.
u
Press and hold
hour fast.
30
A
B
button and
button,
A
button to advance the
!d
Press
B
button. The minute digits start
flashing.
!e
Press
A
button until the desired minute is
displayed.
u
Press and hold
A
minute fast.
!f
Press
B
button. The clock is set, and then
the display moves to the backlight
brightness adjustment.
button to advance the