Operating Elements And Connections - Omnitronic MPVZ-180.6 User Manual

5.2 Operating elements and connections

This user manual describes the
1
Power on/off
Turns the unit on and off. The power indicator lights
up when the unit is powered on.
2
Control LEVEL
Master control for the total volume.
3
Tone controls
2-way tone control for the output signal: bass and
treble.
4
Controls MIC 1 to 3
Volume controls for the microphone inputs MIC 1 to
3.
5
Input MIC 1
• Unbalanced combo connector (XLR/6.3 mm jack)
for connecting a dynamic microphone.
• This input has priority:
announcement via this microphone channel the
level of the other signal sources is attenuated–
depending on the rear control PRIORITY LEVEL–
thereby increasing
announcement.
MPVZ-350.6
as a reference. The other models are similar in construction.
In case of
the intelligibility of
6
LED level meter for the output signal
7
Controls ZONE 1 to 6
5-step volume controls for the PA zones 1 to 6.
8
Controls LINE 1 to 3
Volume controls for the line inputs LINE 1 to 3.
9
Button CHIME
For releasing the chime.
10
LED FAULT
Lights up with activated protective circuit:
• for a few seconds after switching-on unit the
speaker outputs are ready for operation
• during operation when the protective circuit has
switched off the speakers in case of a defect
11
an
Power LED
the
22/28 00056952.DOC, Version 1.1