Switching The Night Light On/Off; Switching The Vibration Alarm On/Off; Adjusting The Vox Sensitivity - Amplicomms V120 User Manual

Note: The upper and lower room temperature settings for the alarm
are for guidance only and are not a substitute for personal supervisi-
on. In extreme temperature conditions during summer or winter the
upper and lower temperature settings for the alarm may be excee-
ded and result in the room temperature warning being activated.
Under such conditions appropriate actions should be taken by the
parent or guardian to ensure the health and safety of the child and
on the basis that the room conditions are considered satisfactory
then the temperature warning option can be temporarily disabled.

Switching the night light on/off

Press the button three times.
This icon appears in the display.
Use these buttons to switch the night light on the transmitter on or
off.

Switching the vibration alarm on/off

Press the button four times.
This icon appears in the display.
Use these buttons to switch the vibration alarm on or off.
When the vibration alarm is activated, the receiver vibrates when
sounds in the room being monitored are so loud that the red Sound
Level LEDs are activated.

Adjusting the VOX sensitivity

(VOX: Voice Operated Transmission = Sound detection)
The VOX function (sound detection) causes the system to start transmitting
Helpline UK 0844 800 6503
(See page 42 for costs and hours of operation)
O
PERATING THE
R
ECEIVER
35