O
PERATING THE
6 Press the
seconds.
7 Switch the transmitter on (switch set to ON).
8 Press the registration key on the back side of the transmit-
ter. After a short time the video from the transmitter will
appear on the screen if the registration was successful. If
the registration failed, "Out of Range" appears on the
screen.
Multi camera mode
If you registered several cameras (up to 4) to your system, you can select a
single camera or switch to scan mode. In scan mode, the signals from all
cameras are continuously displayed alternately each for about 7 seconds.
Press the button seven times.
The number of the selected camera is shown.
Use these buttons to select a camera or the scan mode.
For each of the four cameras you can select the features settings
individually.
38
R
ECEIVER
button briefly. The Link LED flickers for approx. 10
Helpline UK 0844 800 6503
(See page 42 for costs and hours of operation)