O
PERATING THE
Operating the Receiver
Check the transmitter and receiver are working properly each time befo-
re the equipment is put into operation.
Switching the receiver on/off
Press and hold this button until the logo appears first then the image
being taken by the transmitter camera.
Press and hold the button for approx. 1 second to switch the unit off.
In the case of a low battery charge, the Power LED flashes slowly. Place
the receiver in the charger to recharge the battery pack.
Setting the brightness
Press the button once.
This icon appears in the display.
Use these buttons to adjust the brightness to one of five settings.
Temperature option
IMPORTANT INFORMATION The ideal temperature for a baby to sleep
is 16° - 18 °C. Please set or adjust the room temperature accordingly.
Press the button twice.
This icon appears in the display.
Use these buttons to set temperature measurement to OFF, °C or °F.
18°C
The current temperature is displayed during the temperature measu-
rement, e.g. in °C. An alert will occur if the temperature becomes
outside the preset temperature range (15°C - 25°C).
34
R
ECEIVER
Helpline UK 0844 800 6503
(See page 42 for costs and hours of operation)