Smartbox Grid Pad Go 8 Manual page 15

Radio switches
It is also possible to connect switches wirelessly to the Grid Pad using a wireless switch transmitter (sold separately). If you
order the transmitter with the device then it will be paired and ready to use.
If you need to use your radio switch close to other users, you can change the channel to stop them from interfering.
To change the channel, open the transmitter as described in the radio switch manual.
1. Change the transmitter channel by setting the rotary switch to 2, 4 or 6 (different to other transmitter modules).
2. Clear the previous setting by pressing the radio switch reset button for 10 seconds, using a fine point such as a
paper clip.
3. Connect a switch to socket 1 on the transmitter and keep it pressed while momentarily pressing the push button on
the receiver.
4. Repeat with a switch connected to socket 2 on the transmitter
5. Reassemble the case.
Radio switch reset button
13