you select "RESET" and confirm with the OK button
you activate the pre-programmed default settings (DVD)
for this function.
Setting the lock function
With the lock function you can block access to all configura-
tion menus.
1. Hold down the S button
onds.
2. With the
confirm with the OK button
3. With the
confirm with the OK button
the current settings.
4. With the
(Block) or „UNLOCK" (Unblock).
5. With the OK button
display
or
button
or
button
or
button
„LOCK SETUP" then appears again.
for a little longer than 3 sec-
select „SYSTEM SETUP" and
.
select "LOCK SETUP and
. The LCD display
now select between „LOCK"
you save the setting. In the LCD
If
shows