Download Print this page
Scala SC 6360 Operating Instructions

Scala SC 6360 Operating Instructions

For measurements on the upper arm

Advertisement

Quick Links

Digital blood pressure monitor SC 6360
for measurements on the upper arm

Operating instructions

Introduction
Thank you very much for your decision to buy the SC 6360
blood pressure monitor. It is most easily operated, as the
settings that were still necessary with older models have
all been taken care of by the electronic programming
(Fuzzy logic). Just press the relevant button and the
measurement can start.
But this instrument has much more uses. In order to utilize
all its options, please read these instructions carefully
before you use the instrument for the first time and keep
them in a safe place for future reference.
Special features of the SC 6360 blood pressure
monitor
♦ The SC 6360 has a special logic for recognizing the
required pumping pressure (Fuzzy logic). If the pumping
pressure set by the manufacturer is insufficient, the
manometer will recognize it and increase the pressure by
further pumping.
♦ The device has 60 memory locations. The date and time
are displayed and stored together with every blood
pressure value. To recall the memory, please press "MEM
Button" under power-off mode first. Then, the average
measurement result will be shown on the LCD first.
♦ You may set 3 different times for the alarm and
measurements.
♦ The instrument switches automatically back into its clock
function 3 min after the blood pressure has been
measured.
3

Advertisement

loading
Need help?

Need help?

Do you have a question about the SC 6360 and is the answer not in the manual?

Questions and answers

Summary of Contents for Scala SC 6360

  • Page 1: Operating Instructions

    Operating instructions Introduction Thank you very much for your decision to buy the SC 6360 blood pressure monitor. It is most easily operated, as the settings that were still necessary with older models have all been taken care of by the electronic programming (Fuzzy logic).
  • Page 2 Patients with cardiac arrhythmia should use the blood San-Chung, Taipei County, pressure monitor only after consulting a doctor. Made in China How to put the SC 6360 into operation / Changing the Importer: batteries SCALA Electronic GmbH Put 4 LR6 batteries in the compartment as indicated on the Ruhlsdorfer Straße 95...
  • Page 3 Setting the alarm clock incorrect placement of the cuff or the use of the wrong type The SC 6360 features an alarm clock. The alarm can be of batteries or accumulators. set to ring at three different times in the day. The alarm is...
  • Page 4 Reference to standards During the certification process, a fixed number of instruments was subjected to stringent clinical tests. These instruments used the same program for measuring the blood pressure as the instrument which is now in your possession. This instrument is therefore deemed to have been clinically tested as well.