Instructions - MAXTEK 53726 User Manual

Instructions

Switching your radio on for the first time
• Connect the mains adaptor to the mains outlet and to the DC port
on the radio.
• Fully extend the aerial as far as it will go.
• The radio will display the 'Welcome' message.
• The radio will now auto tune, as you will see on the LCD display.
• The radio will check and set the time via DAB. This can take up to
10 seconds to complete.
• After the clock is set the radio will continue to scan for DAB stations.
You will see the amount of stations found indicated by a number on
the right. This can take up to 2 minutes to complete.
• Once the radio have successfully completed the auto tune, the
radio will display the first alphanumerically station found.
• If there is no DAB signal, or the scan is cancelled by using the
'Tune/Select' dial the LCD will display 'Off Air' . The time will also be
set incorrectly as the scan has been cancelled.
AFTERSALES SUPPORT
enquiries@quesh.co.uk
5
DAB & FM Radio
www.quesh.co.uk
53726