Specifications; Standard Accessories; Additional Safety Warnings - Hitachi WR 22SE Handling Instructions Manual

IMPACT WRENCH SAFETY
WARNINGS
○ Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring or its own cord.
Fasteners contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.

ADDITIONAL SAFETY WARNINGS

1. When using the tool at a hight, make sure that there is
nobody below.
2. Use earplugs if using for a long time use.
3. Switch the reversing switch only after the motor has stoped
when it is necessary to change the direction of the rotation.
4. Use a step up transformer when a long extension cable
is used.
5. Confi rm the tightening torque by a torque wrench before
use in order to assertain the correct tightening torque to
be used.
6. Assemble the socket securely to the impact wrench with
the socket pin and ring.
7. Confi rm whether the socket has any cracks in it.
8. Always hold the handle and side handle of the impact
wrench fi rmly. Otherwise the counterforce produced
may result in inaccurate and even dangerous operation.
9. RCD
The use of a residual current device with a rated residual
current of 30 mA or less at all times is recommended.
SYMBOLS
WARNING
The following show symbols used for the machine. Be
sure that you understand their meaning before use.
WR22SE / WR25SE : Impact Wrench
Read all safety warnings and all instructions.
Switching ON
Switching OFF
Clockwise rotation
Counterclockwise rotation
Disconnect mains plug from electrical outlet
Class II tool

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package
contains the accessories listed in the below.
○ Case ...........................................................................1
Standard accessories are subject to change without notice.
APPLICATIONS
○ Tightening and loosing various kinds of bolt and nut.

SPECIFICATIONS

Model
Voltage (by areas)*
Power input*
No load speed / Impact
rate
Square drive
High
Capacities
tension bolt
(size of
Ordinary
bolts)
bolt
Tightening torque
(Max.)**
Weight
* Be sure to check the nameplate on product as it is
subject to change by areas.
** Tightening the bolt without extension cord at rated voltage.
NOTE
Due to HITACHI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
MOUNTING AND OPERATION
CAUTION
To prevent accidents, make sure to turn the switch off
and disconnect the plug from the receptacle.
Action
Mounting the socket (1)
Mounting the side handle
Changing the rotation direction
Dismounting the hook hanger (WR25SE)
Selecting accessories*
* Select accessories that are suited to a specifi c task.
For details contact Hitachi Authorized Service Center.
1. Switch operation (Fig. 3)
The switch (2) in this machine functions as a motor
switch and rotational direction selector switch. When
the switch is set to R indicated on the handle cover, the
motor rotates clockwise to tighten the bolt.
When the switch is set to L, the motor rotates
counterclockwise to loosen the bolt. When the switch is
released, the motor stops.
2. Operating time
The tightening torque increases when the operating time
increases. But the tightening torque does not increase
above a certain value even if the tool is driven for a long
time (See Fig. 5).
3
WR22SE WR25SE
(110V, 120V, 230V, 240V)
800 W 900 W
1400 / 2000 /min 1100 / 1500 /min
19 mm 25.4 mm
M16 ― M22 M22 ― M24
M14 ― M24 M22 ― M30
620 N·m 1000 N·m
4.6 kg 7.7 kg
Figure Page
1
2
3
4
―
5
5
5
5
7