Functional Description; Assembly; Switch Action; Installing Side Grip (Handle) - Makita N9501B Instruction Manual

FUNCTIONAL
DESCRIPTION
1. Slide switch

ASSEMBLY

6
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.

Switch action

001036
1
CAUTION:
• Before plugging in the tool, always check to see that the
slide switch actuates properly and returns to the "OFF"
position when the rear of the slide switch is depressed.
• Switch can be locked in "ON" position for ease of
operator comfort during extended use. Apply caution
when locking tool in "ON" position and maintain firm
grasp on tool.
To start the tool, slide the slide switch toward the "I (ON)"
position. For continuous operation, press the front of the
slide switch to lock it.
To stop the tool, press the rear of the slide switch, then slide
it toward the "O (OFF)" position.
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.

Installing side grip (handle)

001053
CAUTION:
• Always be sure that the side grip is installed securely
before operation.
Screw the side grip securely on the position of the tool as
shown in the figure.