Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita N9500N
Summary of Contents for Makita N9500N
- Page 1 INSTRUCTION MANUAL Angle Grinder N9500N 008435 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model N9500N Depressed center wheel diameter 100 mm Spindle thread Rated speed (n) / No load speed (n 12000 min Overall length 245 mm Net weight 1.8 kg • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. - Page 3 moving parts. Damaged or entangled cords Power tool use and care increase the risk of electric shock. 18. Do not force the power tool. Use the correct When operating a power tool outdoors, use an power tool for your application. The correct extension cord suitable for outdoor use.
-
Page 4: Grinder Safety Warnings
GEB084-1 capable stopping small abrasive workpiece fragments. The eye protection must GRINDER SAFETY WARNINGS be capable of stopping flying debris generated by Safety Warnings Common for Grinding, Sanding, various operations . The dust mask or respirator Wire Brushing, or Abrasive Cutting-Off Operations: must be capable of filtrating particles generated by This power tool is intended to function as a your operation. - Page 5 a) Maintain a firm grip on the power tool and Additional Safety Warnings Specific for Abrasive position your body and arm to allow you to Cutting-Off Operations: resist kickback forces. Always use auxiliary a) Do not “jam” the cut-off wheel or apply handle, if provided, for maximum control over excessive pressure.
- Page 6 Additional safety warnings: 35. Ensure that ventilation openings are kept clear 16. When using depressed centre grinding wheels, when working in dusty conditions. If it should be sure to use only fiberglass-reinforced become necessary clear dust, first wheels. disconnect the tool from the mains supply 17.
-
Page 7: Functional Description
FUNCTIONAL DESCRIPTION ASSEMBLY CAUTION: CAUTION: Always be sure that the tool is switched off and Always be sure that the tool is switched off and • • unplugged before adjusting or checking function on unplugged before carrying out any work on the tool. the tool. -
Page 8: Maintenance
1. Screwdriver 008439 008440 ALWAYS hold the tool firmly with one hand on rear Install the base on the wheel cover using the hole in the handle and the other on the side handle. Turn the tool on wheel cover. and then apply the wheel or disc to the workpiece. -
Page 9: Optional Accessories
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Wheel guard (Wheel cover) • Inner flange • Depressed center wheels •... - Page 12 Makita Corporation www.makita.com 883115G6...