Spinning; Final Spin Speed; Rinse And Interim Spin; To Omit The Final Spin (Rinse Hold) - Miele W 3370 Operating Instructions Manual

Spinning

Final spin speed

Programme
Cottons
Minimum iron
Automatic plus
Dark garments / Denim
Express 20
Shirts
Woollens /
Delicates
Drain/Spin
Separate rinse/Starch
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.

Rinse and interim spin

There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for a
Cottons programme, an additional rinse
is introduced.
22

To omit the final spin (Rinse hold)

^ Press the "Spin" button repeatedly
rpm
until the Rinse hold indicator light
1400
comes on. The laundry will not be
1200
spun and will remain suspended in
900
the final rinse water. This reduces
1200 creasing if the laundry is not going to
be removed from the drum immedi-
1400
ately after the end of the programme.
600
– To start the final spin:
1200
600
Use the "Spin" button to select the
spin speed you want. The final spin
1400
will then begin.
1200
– To end the programme:
Press the Door button. The water will
drain away. Press the Door button
again to open the door.
To omit the spin between rinses and
the final spin
^ Press the "Spin" button repeatedly
until the Without spin indicator light
comes on. The laundry is not spun
after the final rinse. The water will
drain away and the machine will go
straight into the anti-crease stage.
With some programmes an additional
rinse is introduced if this setting is
selected.