Cleaning And Maintenance; After Sales Service - Envirovent POWER-170 Installation And Wiring Instructions

N.B. If used in a lighting circuit, for reliable operation, we recommend a
tungsten filament lamp. The manufacturers of some fluorescent and low energy
lighting systems indicate that these can interfere with electronic timer circuits.

CLEANING AND MAINTENANCE

IMPORTANT: DISCONNECT FROM THE MAINS SUPPLY BEFORE CARRYING
OUT CLEANING OR MAINTENANCE
The POWER fans have a safety switch which automatically isolates the fan motor
when the outer grille is removed. In this way, the fan may be cleaned without any risk
of electric shocks.
For cleaning purposes, remove the outer grille (Fig.4) and, if your model is a POWER
250, take out the filter at the back of it as well. The filter and the grille may be cleaned
by hand in hot soapy water and the extractor housing wiped with a damp cloth.
We recommend you do not try to remove any more parts than those mentioned as any
tampering would automatically cancel the guarantee.
All regulations and requirements MUST be strictly followed to prevent hazards to life and property
both during and after installation, and during any subsequent servicing and maintenance.

AFTER SALES SERVICE

We recommend you not to dismantle or remove any other parts than those mentioned,
as any tampering would automatically cancel the guarantee. If you detect any fault,
contact EnviroVent on 01423 810810.
Thank you for choosing EnviroVent - the fastest growing ventilation company in the
UK.
And remember, if you have any problems please call our dedicated Technical Team on
the Hotline 0845 27 27 810.
All EnviroVent products are designed to be recycled when they reach the end of their
working life. To save the environment and to reduce landfill, please call EnviroVent on
0845 27 27 810 to arrange for the fan to be returned to the factory.
EnviroVent Ltd
EnviroVent House
Hornbeam Business Park
Harrogate
HG2 8PA