Cleaning And Maintenance; After Sales Service - Envirovent PROFILE-100 Installation And Wiring Instructions

Note:
If the fan never turns on:
- Humidity adjuster is not at its lowest setting. Turn the adjuster anticlockwise
(do not force the adjuster) to the minimum setting.
- The fan is fitted in an area where there is no air flow.
- The humidity level in the room is below 60% RH.
If the fan never stops:
- Humidity adjuster is not at its highest setting. Turn the adjuster clockwise (do
not force the adjuster) to the maximum setting.
- The humidity level in the room is above 90% RH.
• PROFILE – 100 PIR
Models provided with a PIR (passive infra-red) detector and a "run on" timer (1 to
30 mins).
The unit starts automatically when a movement is detected within a maximum
distance of 2 metres (fig. 8) and will continue to operate for the set period.
The desired run-on time is selected by means of an adjuster positioned on the
printed circuit board (fig. 7) and accessible once the grille (1) has been removed:
- To reduce the run-on time, turn anticlockwise (min. 1 minute)
- To increase the run-on time, turn clockwise (max: 30 minutes).

CLEANING AND MAINTENANCE

IMPORTANT:
CARRYING OUT CLEANING OR MAINTENANCE
To ensure optimum performance from you extract fan, it should be cleaned
regularly by a competent person.

AFTER SALES SERVICE

We recommend you not to dismantle or remove any other parts than those
mentioned, as any tampering would automatically cancel the guarantee. If you
detect any fault, contact EnviroVent on 01423 810810.
Thank you for choosing EnviroVent - the fastest growing ventilation company in
the UK.
And remember, if you have any problems please call our dedicated Technical
Team on the Hotline 0845 27 27 810.
DISCONNECT FROM THE MAINS SUPPLY BEFORE