Troy-Bilt Bronco Operator's Manual page 8

Forward Clutch Cable
1. Carefully unwrap the forward clutch cable (Black) from its
shipping position. Pull the cable up through the bottom
hole of the cable bracket and push the cable connector up
through the hole until the groove in the connector snaps
into place. See Fig. 3-4.
Cable Bracket
2. Place the Z-connector into the hole in the forward clutch
bail. See Fig. 3-4.
Set-Up
Tire Pressure
Check the air pressure with a tire guage. Deflate or inflate the
tires equally to between 15 and 20 PSI.
NOTE: Be sure that both tires are inflated equally or the tiller will
pull to one side.
Gas & Oil Fill Up
WARNING!
gasoline. Gasoline is extremely flammable and the
vapors are explosive. Never fuel the machine
indoors or while the engine is hot or running.
Extinguish cigarettes, cigars, pipes and any other
sources of ignition.
Service the engine with gasoline and oil as instructed in the
Engine Operator's Manual packed seperately with your tiller.
Read the instructions carefully.
8 s 2— a
ectiOn sseMbly
Clutch Bail
Forward Clutch
Cable (Black)
Figure 3-4
Use extreme care when handling
& s -u
et p