Disassemble Front Case; Disassemble The Electric Box Cover; Dissasemble Water Tray Sub-Assy - Vivax ACP-18CH50GEI Service Manual

Operation procedures/pictures

Disassemble Front Case

Open the three screw covers and unscrew
five screws on front case. Pull open
the clasp at the front and rear sides,
can remove the front panel.

Disassemble the electric box cover

Loosen the 3 slipknots manually, and then pull
upwards the electric box cover.

Dissasemble water tray sub-assy

Unscrew the screws fixing the water tray and then
loosen the slipknot in the other end. Pull out the
terminal of stepping motor, and then pull upwards
the water tray to take it out.
Screws
Screw cover
Slipknot
Slipknot
Water tray
Terminal