When Holes Become Clogged; Adjustable Depth Rod - Makita HP1030 Instruction Manual

0
When Holes Become Clogged
Should be holes you drill become clogged
with chips or dust, do not
apply
more
pressure. Instead, run the tool idle for a
moment, then back out. Repeating this
procedure two or three times will clean
out the hole completely and then you can
apply pressure once more.
Fig. 6
0
Adjustable Depth Rod
The adjustable depth rod is used to drill
holes of uniform depth. Loosen the screw,
set
to desired position, then tighten the
screw.
Fig. 7
5