Descriptions & Details; Stationary Transmitter - VocoPro Silent PA Owner's Manual

DESCRIPTIONS & DETAILS
FRONT PANEL
1. Power - This powers the ST OFF/ON.
2. Mixer Knob - This balances the audio signals plugged into
the MIC and LINE IN jacks.
• Turn completely counter-clockwise for only Microphone
audio .
• Turn completely clockwise for only Line audio.
• Turn knob to middle position for 50/50 mix of both
Microphone and Line audio.
Note: Microphones plugged into the L/R XLR-1/4" Combo
Jacks will be inaudible when Mixer knob is set to 100% MIC.
3. Frequency Display - This LCD display shows the current
channel and its frequency .
4. Channel Selectors - These buttons select the channel to
be used.
• Up - This button cycles the channel selector upwards
numerically .
• Down - This button cycles the channel selector
downwards numerically .
5. Headphone Volume - This knob adjusts the volume of the
headphone jack.
6. Headphone Jack - This jack outputs both mic & music
signal via an 1/8" Stereo jack.
Note: Audio will still be transmitted if headphones are
inserted in the headphone jack.
7. Mic In - This jack is available for a microphone with an
1/8" connection .
REAR PANEL
1. Ant - Connect the antenna to this post.
2. Input Selector - This switch determines the assignment
of the L/R XLR-1/4" Combo Jacks:
• LINE IN - When set to this position, the L/R XLR-1/4"
Combo Jacks are LINE inputs able to accept signal from
an instrument or music source (i.e. Laptop, smartphone,
MP3 player, etc.).
STATIONARY TRANSMITTER (ST)
SILENT PA
MIC IN
LINE 48V
ANT
IN PHANTOM
STATIONARY TRANSMITTER (ST)
PUSH PUSH
15
PUSH
LINE IN
MIC IN
DC 12-15V IN