Advertisement
Descriptions and Functions
RECEIVER
1. Power Switch - This powers the receiver ON/OFF .
2. Power LED - This indicates power to the receiver .
3. RF A - This LED registers the connection of Microphone A .
4. RF B - This LED registers the connection of Microphone B .
5. Audio Output - This 1/4" jack outputs both microphones' audio .
6. Antenna - Fully extend the antenna for best reception .
MICROPHONES
1. Mic Head - This portion of the mic picks up the vocal audio .
2. Power/Mute Switch - This LED indicates power ON/OFF and Low Battery .
a . Middle Position - Mutes the mic without shutting it off .
b . When powered on, this LED will flash and go out quickly .
c . When the battery is low, this LED will be on continuously .
3. Battery Compartment - This is where the 9V battery is installed .
ANT.
AUDIO OUT
8
Front
Back
Advertisement
