Tools Which May Be Needed; Materials Which May Be Needed (Additional Materials May Be Needed) - Blomberg DWT 14210NBL00 Installation Manual

2. TOOLS WHICH MAY BE NEEDED

Pipe Wrench
Tape Measure
Adjustable Wrench
3. MATERIALS WHICH MAY BE NEEDED
(Additional materials may be required to comply with local codes)
Hole Saw
Level
Hot Water Supply Line - Minimum 3/8" O.D. copper tubing or metal braided dishwasher
supply line.
Electrical Supply Cable - Minimum #14AWG, 2 conductors, 1 ground, insulated copper
conductors.
90° elbow with 3/8" N.P.T. male threads on one leg, and sized to fit your water supply
line (copper tubing/compression fitting, or braided hose) on the other leg.
UL listed conduit connector or strain relief.
Teflon tape or other pipe thread compound to seal plumbing connections.
Shut-off valve and fittings appropriate for hot water supply line (copper tubing/compression
fitting, or braided hose).
Slicone
Glue
Wire Cutter
Hammer
(T20)
Torx Screwdriver
Scot Screwdriver
Brush
3
Drill
Wire Stripper
Phillips Screwdriver
Scissors
Pencil