Important Safety Instructions - Blomberg DWT 14210NBL00 Installation Manual

INTRODUCTION
Please read this installation manual and particularly
the safety instructions completely and carefully.
They will save you time and effort and help to
ensure optimum dishwasher performance.
Be sure to observe all listed warnings and cautions.
Look particularly for the icons with exclamation
marks inside. The information icon also will provide
important references.
WARNING
Ý
Notice
WARNING:Indicates a potentially hazardous
situation which, if not avoided, could
result in death or serious injury.
CAUTION:Indicates a potentially hazardous
situation which, if not avoided, may result
in injury. It may also be used to alert
against unsafe practices.
Notice: Indicates a potentially hazardous
situation which, if not avoided, may result
in damage to the dishwasher, the table-
ware, the equipment or the environment.
1. IMPORTANT SAFETY
INSTRUCTIONS
In addition to these instructions, the dishwasher shall
be installed:
In accordance with all local codes or, in absence
=
of a local code,
In the United States, with the National Electric
=
Code,
In Canada, with the Canadian Electric Code
=
C22.1-latest edition/Provincial and Municipal
codes and/or local codes.
Ý
Notice :
Read these installation instructions completely before
installing and follow them carefully. Save these
installation instructions and pass them on to any
future user.
WARNING
When installing the dishwasher, follow basic
precautions, including the following:
CAUTION
The dishwasher installation must be performed in
=
accordance with this installation manual. If you did
not receive an installation manual, order it by calling
1-800-459-9848 or you may also download it from
our web site at www.Blombergappliances.com
Installation and repair should be performed by a
=
qualified installer. Work by unqualified persons
could be dangerous and may void the warranty.
Do not operate the appliance if damaged,
=
malfunctioning, partially disassembled or if it has
missing or broken parts.
Also follow the safety instructions of the user manual.
=
To reduce the risk of electric shock, fire, or injury
=
to persons, the installer must ensure that the
dishwasher is completely enclosed at the time of
installation.
Only connect the dishwasher to the power supply
=
when all installation and plumbing work is complete.
If the dishwasher is installed in a location that
=
experiences freezing temperatures (e.g. in a vacation
home, cabin, etc.), you must drain all the water
from the dishwasher’s interior. Water system
ruptures that occur as a result of freezing are not
covered by warranty.
Dishwasher must be secured to adjacent cabinetry
=
using the brackets provided. Failure to do this may
cause damage to property or bodily injury.
Connect to a properly rated, protected and sized
=
power supply circuit to avoid electrical overload.
The dishwasher is designed for an electrical supply
of 120 V (volts), 60 Hz (hertz), AC, connected to a
dishwasher-dedicated, properly grounded electrical
circuit with a fuse or breakers rated for 15 amperes.
Electrical supply conductors shall be a minimum of
# 14 AWG copper wire rated at 75 °C (167 °F) or
higher. These requirements must be met to prevent
injury and machine damage. Consult a qualified
electrician if in doubt.
Do not use any extension cord or portable outlet
=
device to connect the dishwasher to a power supply.
Ensure that any plastic wrappings, bags, small
=
pieces etc. are disposed of safely and kept out of
the reach of children. Danger of suffocation!
Remove the door to the washing compartment
=
when removing an old dishwasher from service or
discarding it. Ensure that the appliance presents
no danger to children while being stored for disposal.
Old appliances may contain materials that can be
=
recycled. Please contact your local recycling
authority about the possibility of recycling these
materials.
1