Placement Of Dishwasher Into The Opening; Drain Hose Connection, Water Supply & Electrical Connections; Drain Hose Connection - Blomberg DWT 14210NBL00 Installation Manual

7 PLACEMENT OF DISHWASHER INTO THE
OPENING
Now place the dishwasher into the opening and get ready
to connect all hoses and electrical connections.
CAUTION
Make sure all hoses and electrical wire are pulled through
the side opening of the cabinet, no hoses are kinked
and all slack is taken out as shown in the above figure.
7.1 DRAIN HOSE CONNECTION, WATER
SUPPLY & ELECTRICAL CONNECTIONS

7.1.1 DRAIN HOSE CONNECTION

Connect the drain hose to the drain plumbing.
1. Use the supplied rubber connection hose and drain hose
clamps to connect the dishwasher drain hose to the
plumbing drain connection.
2. Use the spring clamp to secure the rubber connection
hose to the dishwasher drain hose. Use the screw clamp
to secure the rubber connection hose to the plumbing
drain connection.
10
Note that the marks on the
rubber connection hose
should be on the drain
hose side