1-5-8
Fuser unit (16/17 ppm printer [EUR/USA model])
(1) Detaching and refitting the fuser unit
Procedure
1. Remove the rear cover (See page 1-5-3).
2. Remove the right cover and left cover (See
page 1-5-4 and1-5-5).
3. Remove the two screws and then remove
the fuser unit.
4. Check or replace the fuser unit and then refit
all the removed parts.
Screw
Screw
Figure 1-5-38
2HJ/2HK-1
Fuser unit
1-5-25