Procedures For Enabling Raid Or The Ahci Mode - IBM SurePOS 700 Series Operating System Installation Manual

Procedures for enabling RAID or the AHCI mode

These procedures are for the Windows XP or 2000 CD-ROM installation.
10. Select the RAID mode of operation (RAID 0 or RAID 1).
11. Press Enter to use the entire hard drive for RAID.
12. Press Enter to verify that you want to create the RAID Volume.
13. Press Y to answer the question, Are you sure you want to create this
14. Press Esc to exit.
15. Press Y to answer the question, Are you sure you want to exit?
4
SurePOS 700 Series: SurePOS 700-722/742/782, 723/743/783 Operating System Installation Guide
1. Press Delete during BIOS power-on self-test (POST).
2. Select Integrated Peripherals and press Enter.
3. Select INTEL OnChip IDE Device and press Enter.
4. Select SATA mode and press Enter.
5. Select AHCI or RAID.
6. Select Save & Exit.
Note: If you selected RAID mode, continue with these steps:
7. Follow the on-screen instructions to enter the RAID configuration utility during
BIOS POST.
8. Select Create RAID Volume and press Enter.
9. Name the new RAID Volume and press Enter.
volume?
Updated October, 2007