Honda CG125 Fan Owner's Manual page 119

46
Engine Oil and Oil Strainer Screen
Engine oil quality is the chief factor affecting engine
service life. Change the engine oil as specified in the
maintenance schedule (page 43).
When running in very dusty conditions, oil changes
should be performed more frequently than specified in
the maintenance schedule.
Please dispose of used engine oil in a manner that is
compatible with the environment. We suggest you take
it in a sealed container to your local recycling center
or service station for reclamation. Do not throw it in the
trash or pour it on the ground or down a drain.
Used engine oil may cause skin cancer if repeatedly
left in contact with the skin for prolonged periods.
Although this is unlikely unless you handle used oil on
a daily basis, it is still advisable to thoroughly wash
your hands with soap and water as soon as possible
after handling used oil.
Changing the oil requires a torque wrench. If you do
not have it and the necessary skill, we recommend
that you have your Honda dealer perform this service.
If a torque wrench is not used for this installation, see
your Honda dealer as soon as possible to verify proper
assembly.
Change the engine oil with the engine at normal
operating temperature and the motorcycle on its side
stand to assure complete and rapid draining.
1. To drain the oil, remove the oil filler cap/dipstick and
oil strainer screen cap (1).
(1)
2. Remove the spring (2) and oil strainer screen (3).
(3) (2)
3. After the engine oil has been drained out, hold the
motorcycle upright for 10 – 15 seconds to assure
complete draining.
4. Operate the kickstarter several times to aid in
complete draining of the remaining oil.
Owner´s Manual
(1) Oil strainer screen
cap
(2) Spring
(3) Oil strainer screen
(4) O-ring
(4)