Table of Contents
Advertisement
TS600CW_B02.book Page 49 Tuesday, January 24, 2006 10:57 AM
Problem
You cannot store a name
and phone number in
memory.
While programming or
searching, the unit starts to
ring and stops the program/
search.
The display exits the Caller
List.
You cannot redial by
pressing [REDIAL].
Information stored in the
Redial List is erased.
Cause and Remedy
• Programming is not possible when the
handset is off the cradle or the
SP-PHONE/HEADSET indicator lights.
• Check that the batteries are installed in
the unit and that the battery power is not
low.
• Do not pause for over 60 seconds while
storing.
• Do not enter a phone number more than
32 digits long.
• When using the Call Restriction feature
(p. 43), you cannot store a phone
number in the Direct Dial memory
([M1], [M2] or [M3]) and emergency
numbers (#).
• If "Phonebook full" is displayed,
erase other stored items from the
Phonebook memory (p. 33).
• To answer the call, lift the handset or
press [SP-PHONE/HEADSET]. Start
again from the beginning after hanging
up.
• Do not pause for over 60 seconds while
searching.
• If the last number dialed was more than
32 digits long, the number will not be
redialed correctly.
• If "
" flashes, replace the batteries as
soon as possible. Otherwise,
information stored in the Redial List may
be erased, and beep may not sound.
Store the desired item in the Phonebook
or Direct Dial memory, if necessary.
49
Advertisement
Table of Contents
