Table of Contents
Advertisement
TS600CW_B02.book Page 12 Tuesday, January 24, 2006 10:57 AM
Settings
Dialing Mode
You can select the dialing mode by programming. If you have touch tone
service, set to Tone. If rotary or pulse service is used, set to Pulse. Your
phone comes from the factory set to Tone.
Make sure that the handset is on the cradle and the SP-PHONE/
HEADSET indicator light is off.
1
Press [FUNCTION/EDIT].
2
Scroll to "Program ?" by pressing [
or [
]. Press [OK] (Yes key).
3
3
Scroll to "Set dial mode ?" by
pressing [
4
] or [
4
Press [OK] (Yes key).
5
Select "Pulse" or "Tone" by pressing
[
4
] or [
3
].
6
Press [OK] (Save key).
• A long beep sounds.
• The display will return to step 3. To exit
the programming mode, press [EXIT] or
wait for 60 seconds.
• You can exit the programming mode any time by pressing [EXIT].
12
4
]
3
].
Set dial mode ?
34
[OK]=Yes
Dial mode
:Tone
34
[OK]=Save
Advertisement
Table of Contents
