TS600CW_B02.book Page 46 Tuesday, January 24, 2006 10:57 AM
Wall Mounting
This unit can be mounted on a wall.
1
Press the tabs in the
direction of the arrows (1),
then remove the wall
mounting adaptor (2).
2
Tuck the telephone line
cord inside the wall
mounting adaptor, and
push it in the direction of
the arrow (1 and 2).
• "UP WALL" should be facing
upward.
3
Drive screws (not
included) into the wall
using the wall template
below. Connect the
telephone line cord. Mount
the unit, and slide it down.
Wall Template
46
To temporarily set the handset
down during a conversation,
place it as shown in this picture.
9
)
8.3 cm (3
/
"
32
2
Screws
9
)
8.3 cm (3
/
"
32
To Single-Line
Telephone Jack (RJ11C)
1