Canon MG6600 series Online Manual page 185

Open the operation panel (A) until it stops.
The print head holder moves to the replacement position.
Caution
• Do not hold the print head holder to stop or move it forcibly. Do not touch the print head holder
until it stops completely.
Important
• When opening or closing the operation panel, do not touch the buttons and touch screen on the
operation panel. Doing so may result in an unexpected operation.
• Do not touch the metallic parts or other parts inside the machine.
• If the operation panel is left open for more than 10 minutes, the print head holder moves to the
right. In this case, close and reopen the operation panel.
4. Remove the ink tank with the lamp flashing fast.
Push the tab (C) and lift the ink tank to remove.
Important
• Do not touch other parts besides the ink tanks.
• Handle the ink tank carefully to avoid staining of clothing or the surrounding area.
• Discard the empty ink tank according to the local laws and regulations regarding disposal of
consumables.
Note
• Do not remove two or more ink tanks at the same time. Be sure to replace ink tanks one by one
when replacing two or more ink tanks.
• For details on ink lamp flashing speed, see Checking the Ink Status with the Ink
185
Lamps.