When Selecting Ip Address - Canon MG6600 series Online Manual

Hide thumbs Also See for MG6600 series:

Table of Contents

1. Enable printer access control(MAC address)

Select to enable access control to the printer by MAC address.

• The two types of access control (i.e., by MAC address and by IP address) can be enabled at

the same time.

An access control type is enabled as long as the Enable printer access control check box is

selected, regardless of the type currently displayed by selecting in Printer Access Control

• When both access control types are enabled at the same time, a computer or a network device

whose address is registered to either list will be allowed access to the printer.

2. Accessible MAC Addresses:

Shows the registered MAC addresses and any comments.

The Edit Accessible MAC Address screen is displayed to edit the settings selected in Accessible

MAC Addresses:.

Edit Accessible MAC Address Screen/Add Accessible MAC Address Screen

The Add Accessible MAC Address screen is displayed to register the MAC address of a computer or

a network device from which to access the printer over the network.

• Add the MAC address of all computers or network devices within the network from which to

access the printer. The printer cannot be accessed from a computer or a network device that is

not on the list.

Deletes the selected MAC address from the list.

When Selecting IP address

The accessible computers or network devices are specified by their IP addresses. Computers or network

devices whose IP addresses appear on the list are allowed access.

Show Quick Links

Table of Contents