Part Of The Page Is Not Printed - Canon MG6600 series Online Manual

Part of the Page Is Not Printed

When performing automatic duplex printing, the reason below is possible.
Check
When performing automatic duplex printing, the printable area at the top of the page will be 0.08 inches / 2 mm
narrower than the usual.
For this reason, the bottom of the page may not be printed. To prevent this, select the setting to reduce printing
from the printer driver.
Important
• Reduced printing may affect the layout depending on your document.
Apply the print setting specified with the application software if the software has a enlarge/reduce printing
function.
1. Open the printer driver setup window.
How to Open the Printer Driver Setup Window
2. Check the Duplex Printing check box in the Page Setup sheet.
3. Click Print Area Setup, then select Use reduced printing.
805