Casio DT-X100 Series User Manual page 36

1 USB Client Port
2 USB Host Port
3 Power Switch
4 Selector Switch
5 AC Adaptor Jack
6 Terminal Detect
Switch
7 Power Contacts
8 Data
Communication
Terminal
9 Power LED
10 Mount Hooks
E-34
This port is used to transmit data and files (download, upload) by
connecting the Cradle to a PC using a USB cable (DT-380USB-A).
A dedicated driver must be installed in the PC before connecting
the Cradle to the PC.
This port is used to connect a corresponding USB peripheral
device.
Turns the power on and off.
This switch is used to switch between the USB host port and
USB client port.
Connect the AC adaptor here.
This switch detects when the DT-X100 is seated correctly on the
Cradle.
Power is supplied to the DT-X100 via these contacts.
Used for USB communications.
This LED indicates the power status and the mounting status of
the DT-X100.
Off: DT-X100 is not installed. Or, the AC adaptor is not
connected.
Green: Power on, DT-X100 mounted correctly.
Use these hooks to lock the DT-X100 into the cradle.