Casio DT-X100 Series User Manual page 13

6 Screen
7 Trigger Center Key
8 Cursor Keys
9 Enter Key
10 Numeric Keys
11 Fn Key
12 CLR Key
13 Function Keys
14 Microphone
15 Trigger R Key
16 Trigger L Key
17 Barcode Reader Port Laser light or LED light is emitted from this window that reads
18 IR Port
19 Power Contacts
20 Data Communication
Terminal
Displays text and operating instructions.
Used to perform bar code reading. Can be assigned an arbitrary
function.
Perform the same functions as the up and down arrow keys on a
PC keyboard.
Press when finishing entering numerical values or when moving
to the next step.
Used to enter numeric values and decimal points.
Used to make various settings in combination with the function
keys or numeric keys or when starting a pre-registered
application.
Used to clear one letter to the left of the cursor.
Various functions other than bar code reading can be assigned to
these keys.
The default key assignments are as follows.
F1: Similar function as the Alt key on a PC keyboard.
F2: Similar function as the Shift+Tab keys combination on a PC
keyboard. Used to move the cursor among entry or selection
items.
F3: Similar function as the Tab key on a PC keyboard. Used to
move the cursor among entry or selection items.
F4: Not assigned.
F5: Enter a space.
F6: Similar function as the cursor left key on a PC keyboard.
F7: Similar function as the cursor right key on a PC keyboard.
F8: Select text entry mode.
(The mode changes in order of Numeric ➝ Uppercase letter ➝
Lowercase letter)
Used to input a sound including voice.
Used to perform bar code reading.
Used to perform bar code reading.
bar codes.
Used for communication with another Handheld Terminal.
Used to receive power provided by the USB Cradle or Ethernet
Cradle.
Used for data communications.
E-