Display Board Installation - P/N Mpc-Db Or Rnd2-Db - Faraday MPC-6000 Installation, Operation And Maintenance Manual

MPC-6000 / MPC-7000 / RND-2 INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Display Board Installation – P/N MPC-DB or RND2-DB
• With the Inner Front Plate closed, carefully pass connector and cable from keypad through
vertical slot in front plate.
• Remove backing from keypad and carefully attach keypad to front plate. Center window in
keypad on large opening in front plate.
• Attach the cable connection from the keypad on the Inner Front Plate to connector J3 on
the Display Board (P/N MPC(6/7)-DB or RND2-DB).
• Secure Display Board (P/N MPC(6/7)-DB or RND2-DB) to Inner Front Plate Assembly
using four of the provided #6-32x1/4" screws (P/N 906-220604).
• Plug the Cable Assembly (P/N 555-446055) into connector J1 of the Display Board (P/N
MPC(6/7)-DB or RND2-DB) and to connector J11 of the Main Board (P/N MPC6-MB or
MPC7-MB).
Display
Board
J3 - Keypad
Connection
MPC-6000
showing Display
Board and Keyboard
being attached
to Front Plate Ass'y
906-220604 (4)
#6-32 x 1/4 SCREW
J1 - Connection
to Main
Termination
Board
PLATE
ASS'Y
34
MPC-7000
showing Display
Board attached
to Front Plate Ass'y