Advertisement
SAFETY INSTRUCTIONS
• Read and understand this manual and all the safety instructions before
operating this stapler. If you have any questions, please contact our
authorized service centres or retailers for help.
• Never allow the use of flammable gases as a power source for the stapler.
Use filtered, lubricated and regulated compressed air only.
• Never use gasoline or other flammable liquids to clean this stapler. Vapors
in the stapler will ignite by a spark and cause the stapler to explode.
• Do not exceed the maximum permissible operating pressure of this stapler
(100 PSI).
• Disconnect the stapler from its air supply before clearing jams, servicing,
adjusting and while the stapler is not in use.
• Do not keep the trigger pulled when carrying or holding the stapler. Never
carry the stapler by the air hose or pull on the air hose to move the stapler.
• At the workplace, always wear protective equipment such as Z87 safety
glasses, hearing and head protection.
• Do not use a check valve or any other fitting which allows air to remain in
the stapler.
• Do not place your hand or any part of your body in the discharge area of
the stapler when connecting or disconnecting from the air supply.
• Never point any operational driving tool at yourself or at any other person.
GETTING TO KNOW
YOUR STAPLER
Discharge area
SPECIFICATIONS
Model ....................................................................................................................................8121S
Air inlet ..............................................................................................................................1/4" NPT
Maximum permissible operating pressure ..........................................................................100 PSI
Recommended operating pressure range ......................................................................60-90 PSI
Staple size ......................................................................................................21 Ga. x 1/2" Crown
Staple size range ..........................................................................................................1/4" to 5/8"
Air consumption ................................................................................................................1.6 CFM
Magazine capacity ....................................................................................................................150
1/4" NPT Air inlet
Magazine latch
Trigger safety
Trigger
Magazine
Advertisement
