ENGLISH (Original instructions) Intended use d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Your BLACK+DECKER screwdriver has been designed Keep cord away from heat, oil, sharp edges or for screwdriving applications. This tool is intended for moving parts.
Page 5
(Original instructions) ENGLISH g. If devices are provided for the connection of dust 5. Battery tool use and care extraction and collection facilities, ensure these a. Recharge only with the charger specified by the are connected and properly used. Use of dust manufacturer.
ENGLISH (Original instructions) Use clamps or another practical way to secure Impairment of hearing. and support the workpiece to a stable platform. Health hazards caused by breathing dust developed Holding the work by hand or against your body leaves when using your tool (example:- working with wood, it unstable and may lead to loss of control.
(Original instructions) ENGLISH Charge only at ambient temperatures between 10 °C If the supply cord is damaged, it must be replaced by and 40 °C. the manufacturer or an authorised BLACK+DECKER Charge only using the charger provided with the tool. Service Centre in order to avoid a hazard.
Warning! Only use the charger provided to charge When screwing in wood, it is recommended to drill a CS3651LC. pilot hole with a depth equal to the length of the screw. Warning! Do not charge the battery at ambient tempera- A pilot hole guides the screw and prevents splintering tures below 10 °C or above 40 °C.
(Original instructions) ENGLISH Maintenance BLACK+DECKER provides a facility for the collection and recycling of BLACK+DECKER products once they have Your BLACK+DECKER tool has been designed to operate reached the end of their working life. To take advantage of over a long period of time with a minimum of maintenance. this service please return your product to any authorised Continuous satisfactory operation depends upon proper repair agent who will collect them on our behalf.
ENGLISH (Original instructions) EC declaration of conformity Technical data MACHINERY DIRECTIVE CS3651LC (H1) Voltage No-load speed Hard stall torque 5.84 Max. torque CS3651LC Bit holder 6.35 (1/4") Weight 0.32 Black & Decker declares that these products described under "technical data" are in compliance with:...
Page 11
Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
Page 12
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 92591133 5 Te Apunga Place +64 92591122 Mt Wellington Aukland 1060 United Kingdom & Black & Decker Tel.