Black & Decker CS3651LC Original Instructions Manual

Screwdriver
Hide thumbs Also See for CS3651LC:

Advertisement

CS3651LC
www.blackanddecker.au

Advertisement

Table of Contents
loading

Summary of Contents for Black & Decker CS3651LC

  • Page 1 CS3651LC www.blackanddecker.au...
  • Page 4: Intended Use

    ENGLISH (Original instructions) Intended use d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Your BLACK+DECKER screwdriver has been designed Keep cord away from heat, oil, sharp edges or for screwdriving applications. This tool is intended for moving parts.
  • Page 5 (Original instructions) ENGLISH 5. Battery tool use and care g. If devices are provided for the connection of dust extraction and collection facilities, ensure these manufacturer. A charger that is suitable for one type are connected and properly used. Use of dust collection can reduce dust-related hazards.
  • Page 6: Residual Risks

    ENGLISH (Original instructions) Use clamps or another practical way to secure Impairment of hearing. and support the workpiece to a stable platform. Health hazards caused by breathing dust developed Holding the work by hand or against your body leaves when using your tool (example:- working with wood, it unstable and may lead to loss of control.
  • Page 7: Electrical Safety

    Note:The right angled attachment shown on fig.E-J is transformer output. available on selected model only. CS3651LC-XE does not include right angle attachment. The charger automatically shuts off if the ambient temperature becomes too high. As a consequence the charger will be inoperable.
  • Page 8: Hints For Optimum Use

    Warning! Only use the charger provided to charge When screwing in wood, it is recommended to drill a CS3651LC. pilot hole with a depth equal to the length of the screw. Warning! Do not charge the battery at ambient tempera- A pilot hole guides the screw and prevents splintering tures below 10 °C or above 40 °C.
  • Page 9: Maintenance

    (Original instructions) ENGLISH Maintenance BLACK+DECKER provides a facility for the collection and recycling of BLACK+DECKER products once they have Your BLACK+DECKER tool has been designed to operate reached the end of their working life. To take advantage of over a long period of time with a minimum of maintenance. this service please return your product to any authorised Continuous satisfactory operation depends upon proper repair agent who will collect them on our behalf.
  • Page 10: Technical Data

    ENGLISH (Original instructions) Technical data How to make a warranty claim CS3651LC (H1) u Any product subject to a warranty claim should be returned to the place of purchase for assessment Voltage by a Stanley Black & Decker Australia distributor or representative.
  • Page 12 90619518 12/2014...

Table of Contents