Advertisement
Switch action
Tool speed is increased by increasing pres-
sure on the trigger. To start the tool,
simply pull the trigger. Release the trigger
to stop.
I; I
Trigger switch
1
CAUTION :
Before inserting the battery cartridge into the tool, always check to
see
that the trigger
switch actuates properly and returns t o the "OFF" position when released.
Reversing switch action
This tool has a reversing switch to change
the direction of rotation. Move the revers-
ing switch to the left for clockwise rotation
or to the right for counterclockwise.
CAUTION
:
*Always check the direction of rotation before operation.
.Move the reversing switch only after the tool comes to a complete stop. Changing the
direction of rotation before the tool stops may damage the tool.
Speed change
To change the speed, slide the speed
change lever to the
"H"
side for high speed
or
"L"
side for low speed. To slide the
speed change lever easily, pull the trigger
slightly while pushing the speed change
lever. Be sure that the speed change lever i s
set to the correct position before operation.
Use the right speed for your job.
i \\
Speed change lever
CAUTION
:
Always
set
the speed change lever fully into the correct position. If you operate the tool
with the speed change lever positioned halfway between the "H" side and "L" side, the
tool may be damaged.
8
Advertisement
