Makita 8419B Instruction Manual

Makita 8419B Instruction Manual

2-speed hammer drill

Advertisement

INSTRUCTION MANUAL
2-Speed Hammer Drill
8419B
006760
DOUBLE INSULATION
IMPORTANT: Read Before Using.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8419B and is the answer not in the manual?

Questions and answers

John
May 15, 2025

My makita 8419b has power going to the body but won't work

1 comments:
Mr. Anderson
May 22, 2025

If a Makita 8419B has power but won't work, possible issues could include:

1. The action mode ring is not fully turned to the desired setting (rotation or hammering).
2. The tool is not switched on properly.
3. The accessory or attachment is not correctly installed.
4. Internal damage or wear requiring service by a qualified repair person.

Always ensure the tool is unplugged before checking functions.

This answer is automatically generated

Gerry Duffy
May 16, 2025

Where is the reverse switch

Summary of Contents for Makita 8419B

  • Page 1 INSTRUCTION MANUAL 2-Speed Hammer Drill 8419B 006760 DOUBLE INSULATION IMPORTANT: Read Before Using.
  • Page 2: Specifications

    ENGLISH (Original instructions) SPECIFICATIONS Model 8419B Steel 13 mm Capacities Wood 30 mm Concrete 19 mm High 1,300 No load speed (min 1,000 High 14,300 Blows per minute (min 11,000 Overall length 370 mm Net weight 3.0 kg Safety class •...
  • Page 3 Power tool plugs must match the outlet. Never Makita Corporation responsible modify the plug in any way. Do not use any manufacturer declare that the following Makita adapter plugs with earthed (grounded) power machine(s): tools. Unmodified plugs and matching outlets will Designation of Machine: reduce risk of electric shock.
  • Page 4 14. Remove any adjusting key or wrench before parts. This will ensure that the safety of the power turning the power tool on. A wrench or a key left tool is maintained. attached to a rotating part of the power tool may 26.
  • Page 5: Functional Description

    This tool has an action mode changing ring. FUNCTIONAL DESCRIPTION For rotation with hammering, turn the ring in the direction of multiple arrow indication. For rotation only, turn the ring in the direction of single CAUTION: arrow indication. Always be sure that the tool is switched off and •...
  • Page 6 Do not apply more pressure when the hole becomes Depth gauge clogged with chips or particles. Instead, run the tool at an idle, then remove the bit partially from the hole. By 1. Depth gauge repeating this several times, the hole will be cleaned out and normal drilling may be resumed.
  • Page 7 Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Tungsten-carbide tipped hammer bit • Blow-out bulb • Safety goggles •...
  • Page 8 Makita Corporation Anjo, Aichi, Japan www.makita.com 883061B229...

Table of Contents

Save PDF