Download Print this page

Additional Safety Rules - Makita 8411D Instruction Manual

Equipped with electric brake

Advertisement

ADDITIONAL SAFETY RULES
FOR CHARGER & BATTERY CARTRIDGE
1. Do
not charge Battery Cartridge when temperature is BELOW 10°C
(5OOF)
2. Do not attempt t o use a step-up transformer, an engine generator or DC power
3.
Do
not allow anything t o cover or clog the charger vents.
4. Always cover the battery terminals with the battery cover when the battery
5.
A battery short can cause a large current flow, overheating, possible burns
or ABOVE 4OoC (104OF).
receptacle.
cartridge is not used.
and even a breakdown.
(1) Do
not touch the terminals with any conductive material.
(2)
Avoid storing battery cartridge in a container with other metal objects such
(3)
Do
not expose battery cartridge t o water or rain.
ture may reach or exceed 5OoC (122OF).
completely worn out. The battery cartridge can explode in a fire.
as nails, coins, etc.
6. Do
not store the tool and Battery Cartridge in locations where the tempera-
7. Do
not incinerate the Battery Cartridge even if it is severely damaged or is
ADDITIONAL SAFETY RULES
1.
Be aware that this tool is always in an operating condition, because it does
not have t o be plugged into an electrical outlet.
2.
Wear a hard hat (safety helmet), safety glasses and/or face shield. It is also
highly recommended that you wear a dust mask, ear protectors and thickly
padded gloves.
3.
Under normal operation, the tool is designed t o produce vibration. The screws
can come loose easily, causing a breakdown or accident. Check tightness of
screws carefully before operation.
Be sure
no
one is below when using the tool in high locations.
4.
Always be sure you have a firm footing.
5. Hold the tool firmly.
6.
Keep hands away from rotating parts.
7. Do not leave the tool running. Operate the tool only when hand-held.
8.
When drilling into walls, floors or wherever "live" electrical wires may be
encountered,
DO NOT
TOUCH ANY METAL PARTS OF THE TOOL!
Hold the tool by the insulated grasping surfaces t o prevent electric shock if
you drill into a "live" wire.
9. Do
not touch the bit or the workpiece immediately after operation; they may
be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
5

Advertisement

loading

This manual is also suitable for:

8411dw